What is Slide Fire?

The Slide Fire is a replacement stock for your AR-15 that when used properly, simulates automatic fire.

There are no permanent modifications to the gun and installation of the Slide Fire does not impair function of the rifle at all.

The Slide Fire simply allows you to shoot as fast as you want to, You can shoot one round, 2 rounds, 3 rounds, 15 rounds or a full magazine. It isn’t governed by a mechanical auto-sear. There are no moving parts in the Slide Fire and no springs. You hold your finger on the trigger rest and push forward to fire the gun. It is not automatic. Nothing is automatic. You actively fire every round, and if you stop pushing forward or you take your finger off the trigger the gun stops firing. It just helps you fire the gun in semi-automatic very fast.

You will not need a gunsmith to install the SSAR-15 from Slide Fire. It comes with a long Allen wrench to remove the grip screw and the grip slides right off. The only thing you have to be careful with is the spring from the safety, which is held in by the grip on an AR. When you remove the grip the spring comes out. The Slide Fire comes with a block that goes over this grip holding rib, and the block holds down the safety spring. Then you just lift the nib that holds your stock in the detent on you AR, slide your stock off the back and slide the SSAR-15 on. It has its own lever on the bottom that holds the stock in the detent and when turned will also lock the stock stiff.